Temperature & Moisture Probe
Monitor your environment with the Felix Smart Temperature and Moisture Probe. All of our probes come pre-calibrated, saving you the hassle of initial calibration. Simply connect it to your Felix Smart Controller via USB and you can begin monitoring Ground Moisture, Ground and Water Temperature, EC, TDS, and Water Presence.
Specs
|
Material |
Stainless Steel, ABS |
|
Reads |
EC, TDS, Ground Moisture, Temperature, Water Presence |
|
Temperature Range |
-20ºC to 70ºC (-4ºF to 158ºF) |
|
Electrical Conductivity (mS/m) |
0 - 300 mS/m |
|
Degree of Water Saturation in Soil |
0 - 100% |
|
Dielectric Permittivity (ε) (Temperature corrected) |
1 (Air) : 80 (Water) / 5% |
|
Total Dissolved Solids (ppm) |
0 - 2000 ppm |
|
Max Pressure |
689 kPa (100 PSI) |
|
Max Depth |
70m (230 ft) |
|
Connector |
USB |
|
Cable Length |
2.7m (9 ft) |
|
Time Before Recalibration |
~ 2 Years |
|
Water Use |
Waterproof |